Monday, March 4, 2013

How To Jailbreak iOS 4.3.2 Untethered On Windows Using Sn0wbreeze 2.6

April 20, 2011 by · Leave a Comment 

iH8sn0w, the brain behind Sn0wbreeze jailbreaking tool for Windows, has recently released the newly updated Sn0wbreeze 2.6 for Windows users to completely jailbreak iOS 4.3.2 untethered running on iPhone 4, 3GS, iPad (1st Gen) and iPod touch. Similar to the Redsn0w, this Sn0wbreeze 2.6 is not supported the iPad 2 jailbreak yet. Here’s presenting you the step by step guidelines on how to jailbreak iOS 4.3.2 untethered on Windows using Sn0wbreeze 2.6.

Why one will go for the Sn0wbreeze over Redsn0w? If your iPhone relies on an unlock, then, you must use Sn0wbreeze 2.6 that will help retain the old baseband for iPhone 4 and 3GS users so that they can be unlocked using Ultrasn0w. You can get the step by step guidelines for jailbreaking using Redsn0w on both Windows and Mac by clicking here.

Well, for those who don’t know, iOS 4.3.2 was jailbroken last week using PwnageTool bundles (On Mac), but it was limited to tethered boot. But, now, using the new version of Redsn0w and Sn0wbreeze, you can jailbreak your iPhone, iPad and iPod touch completely untethered on recent iOS 4.3.2 firmware.

How To Jailbreak iOS 4.3.2 Untethered On Windows Using Sn0wbreeze 2.6

NOTE : You can get all the necessary download links for this guidelines at the end of the article.

Step – 1 : First download all the required tools from the end to your desktop.

Step – 2 : Now, start Sn0wbreeze, and click on the next “blue” colored arrow to proceed.

How to jailbreak iOS 4.3.2 untethered on Windows Using Sn0wbreeze 2.6

Step – 3 : Then, select the required firmware .ipsw file for your iOS device, by clicking on the “Browse” button.

How to jailbreak iOS 4.3.2 untethered on Windows Using Sn0wbreeze 2.6 (1)

Step – 4 : After that, Sn0wbreeze will identify the selected IPSW file. Once completed, click on the next “blue” colored arrow to proceed.

How to jailbreak iOS 4.3.2 untethered on Windows Using Sn0wbreeze 2.6 (2)

How to jailbreak iOS 4.3.2 untethered on Windows Using Sn0wbreeze 2.6 (3)

Step – 5 : Next, select the “Expert Mode”, followed by “Build IPSW” option to start building your custom firmware.

How to jailbreak iOS 4.3.2 untethered on Windows Using Sn0wbreeze 2.6 (4)

How to jailbreak iOS 4.3.2 untethered on Windows Using Sn0wbreeze 2.6 (5)

As the building of custom firmware may take some time, hence, in the meanwhile, you can also play the Pac Man game to kill some time.

How to jailbreak iOS 4.3.2 untethered on Windows Using Sn0wbreeze 2.6 (6)

Step – 6 : Then, Sn0wbreeze will greet you with the following “Done!” message when the custom firmware has been created successfully.

How to jailbreak iOS 4.3.2 untethered on Windows Using Sn0wbreeze 2.6 (7)

Step – 7 : After that, follow the on screen instructions to enter DFU Mode using Sn0wbreeze;

How to jailbreak iOS 4.3.2 untethered on Windows Using Sn0wbreeze 2.6 (8)

  • Hold “Power” and “Home” buttons for 10 seconds.
  • After that, release the “Power” button, but continue holding the “Home” button for 10 more seconds.
  • Finally, your iOS device should be in DFU Mode.

Well, if you have followed the above steps properly, then you’ll see the following message from Sn0wbreeze.

How to jailbreak iOS 4.3.2 untethered on Windows Using Sn0wbreeze 2.6 (9)

Step – 8 : Now, start iTunes and click on your iOS device icon from the iTunes sidebar. After that press and hold left “Shift” button on the keyboard and then, click on “Restore” (Not “Update” or “Check for Update”) button in iTunes and then release this button.

How to jailbreak iOS 4.3.2 untethered on Windows Using Sn0wbreeze 2.6 (10)

The above step will make iTunes prompt you to select the location for your custom firmware 4.3.2 file. Just select the required custom .ipsw file that you created above, and after that click on “Open”.

Step – 9 : After that, sit back and enjoy as iTunes does the rest for you, which will involve a series of automated steps. Simply be patient at this stage and don’t do anything silly, and wait while iTunes installs the new iOS 4.3.2 firmware on your iOS device. At this point, your iOS device will be showing a progress bar indicating the installation process. Once the installation is done, your iOS device will be jailbroken on iOS 4.3.2.

How To Unlock iOS 4.3.2 :

Currently, the Ultrasn0w unlock tool is said to be broken on iOS 4.3.2, and hence, you can temporarily use the Ultrasn0w Fixer for 4.3.2 (ompatible basebands: 01.59.00 / 04.26.08 / 05.11.07 / 05.12.01 / 05.13.04 / 06.15.00) to unlock your iPhone 4 and 3GS. Well, you can get the step by step guidelines from here.

That’s it!

well, if you’ll find any difficulty while going through the above steps, then, don’t hesitate, just write to us in or comment section below. Also, if you are successful in performing the above, then, just don’t forget to share your views and comments on this with us.

Downloads

Download iOS 4.3.2 for iPhone, iPad and iPod touch from here.

Download Sn0wbreeze 2.6 for Windows from here.

Download iTunes 10.2.2 from here.


Did not find what you were looking for? Try using our below search engine..

Loading
We will send you some more information related to How To Jailbreak iOS 4.3.2 Untethered On Windows Using Sn0wbreeze 2.6
Article by Prativa Khuntia

Hello Friends ! This is Prativa, a full time writer who covers breaking Apple News and writes all the things about iPhone, iPad, iPod touch and Mac OS X exclusively for 3noobs.com. I love descriptive writing. Apart from that I have great interest on Science related topics as I was a Science student.

Prativa Khuntia has written 2680 articles for us.

Speak Your Mind

Tell us what you're thinking...
and oh, if you want a pic to show with your comment, go get a gravatar!