Tuesday, July 9, 2013

How To Jailbreak iOS 4.3.2 On iPhone 4 Untethered and Preserve Baseband For Unlock Using PwnageTool 4.3.2

April 25, 2011 by · Leave a Comment 

Well, recently, the iPhone Dev Team has updated PwnageTool to the version 4.3.2 for supporting untethered iOS 4.3.2 jailbreak using i0n1c’s exploit. As reported earlier, the i0n1c’s exploit supports all the current iOS devices, except the iPad 2. Hence, this PwnageTool 4.3.2 jailbreak will also jailbreak iOS 4.3.2 across all iOS devices, such as, iPhone 4, 3GS, iPad 1, iPod touch 4G / 3G and Apple TV, except the iPad 2.

What is the main advantage of using PwnageTool over Redsn0w? Well, it’s very simple! Yes, if your iPhone relies on a carrier unlock, you must use PwnageTool 4.3.2 to update to a custom iOS 4.3.2 firmware without the upgraded baseband so that you can unlock using Ultrasn0w. Windows users can alternatively use Sn0wbreeze 2.6, and you can get the step by step instructions by just clicking here.

Also, the complete step by step guidelines for jailbreaking using using Redsn0w on both Windows and Mac can be found here.

Well, originally, iOS 4.3.2 was jailbroken last week using PwnageTool bundles (on Mac), but it was limited to tethered boot. But, now, using the newly released Redsn0w and Sn0wbreeze versions, you can jailbreak your iPhone, iPad and iPod touch completely untethered on the recent iOS 4.3.2 firmware.

How To Jailbreak iOS 4.3.2 On iPhone 4 Untethered and Preserve Baseband For Unlock PwnageTool 4.3.2

NOTE : You can get all the necessary download links for this guideline at the end of the article.

Step – 1 : First, download PwnageTool 4.3.2 for Mac OS X.

Step – 2 : After that, download the iOS 4.3.2 for iPhone, iPad, iPod touch and Apple TV.

Step – 3 : Now, start PwnageTool in “Expert Mode” and select your device.

How to jailbreak iPhone 4 4.3.2 untethered and preserve baseband for unlock using PwnageTool 4.3.2 (1)

Step – 4 : Now, browse for iOS 4.3.2 firmware for your iOS device as shown in the screenshot below;

How to jailbreak iPhone 4 4.3.2 untethered and preserve baseband for unlock using PwnageTool 4.3.2 (2)

Step – 5 : After that, select “Build” to start creating custom 4.3.2 firmware file.

NOTE : Well, if you are using an unofficial carrier, and want to preserve the old baseband so that it can be unlocked using Ultrasn0w, just be sure that you check “Activate the phone” option that’s found under “General”.

How to jailbreak iPhone 4 4.3.2 untethered and preserve baseband for unlock using PwnageTool 4.3.2 (3)

Step – 6 : Now, PwnageTool will create the custom .ipsw file for your iPhone that will be jailbroken.

How to jailbreak iPhone 4 4.3.2 untethered and preserve baseband for unlock using PwnageTool 4.3.2 (4)

Step – 7 : After that, enter your iOS device into DFU Mode using PwnageTool, by following the instructions below;

  • First, hold “Power” and “Home” buttons for 10 seconds.
  • Now, release the “Power” button, but continue holding the “Home” button for 10 more seconds.
  • Now, your iOS device should be in DFU Mode.

How to jailbreak iPhone 4 4.3.2 untethered and preserve baseband for unlock using PwnageTool 4.3.2 (5)

Step – 8 : Now, start iTunes, and click on your iOS device icon from the iTunes sidebar. After that, press and hold left “ALT” (option) button for Mac, or left “Shift” button if you are on Windows on the keyboard and then, click on “Restore” (Not “Update” or “Check for Update”) button in the iTunes and then release this button.

How to jailbreak iPhone 4 4.3.2 untethered and preserve baseband for unlock using PwnageTool 4.3.2 (6)

The above step will make iTunes prompt you to select the location for your custom firmware 4.3.2 file. Now, select the required custom .ipsw file that you created above, and click on “Open”.

Step – 9 : Now, just sit back and enjoy as iTunes does the rest for you, which will involve a series of automated steps. But, in the meanwhile, just be patient, and don’t do anything silly. Simply wait while iTunes installs the new firmware 4.3.2 on your iOS device. At this point, your iOS device screen will be showing a progress bar indicating the installation process. Once the installation is completed, your iOS device will be jailbroken on iOS 4.3.2.

That’s it!

Well, if you’ll find the above steps are difficult for you, then you can go for the instructions shown in the video embedded below;

How To Unlock iOS 4.3.2 :

Ultrasn0w 1.2.2 for unlocking iOS 4.3.2 is now available for both iPhone 4 and 3GS. Also, you can use it to unlock iOS 4.3.2 (compatible basebands: 01.59.00 / 04.26.08 / 05.11.07 / 05.12.01 / 05.13.04 / 06.15.00) on your iPhone 4 and 3GS. You can get the step by step instructions on how to do this from here.

Well, if you’ll have any difficulty while going through the above steps, then, don’t hesitate, just write to us in our comment section below. Also, if you are successful in performing the above, then, just don’t forget to share your views and comments on this with us.

Downloads

Download PwnageTool 4.3.2 for Mac OS X from here.

Download iOS 4.3.2 for iPhone, iPad and iPod touch from here.

[Thanks RedmondPie]


Did not find what you were looking for? Try using our below search engine..

Loading
We will send you some more information related to How To Jailbreak iOS 4.3.2 On iPhone 4 Untethered and Preserve Baseband For Unlock Using PwnageTool 4.3.2
Article by Prativa Khuntia

Hello Friends ! This is Prativa, a full time writer who covers breaking Apple News and writes all the things about iPhone, iPad, iPod touch and Mac OS X exclusively for 3noobs.com. I love descriptive writing. Apart from that I have great interest on Science related topics as I was a Science student.

Prativa Khuntia has written 2680 articles for us.

Speak Your Mind

Tell us what you're thinking...
and oh, if you want a pic to show with your comment, go get a gravatar!